Hubs
$100.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$250.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$99.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$219.99
- Tough on trail and light on price rated for everything from XC to Enduro and E-bike
- Steel axles cartridge bearings robust alloy hub shell and steel cassette body
- 10-degree pawl engagement
- International Standard 6-bolt disc mount
- *Shimano/SRAM
$242.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$379.99 - $398.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$150.00
Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine.
- High-load sealed cartridge bearings
- Classic j-bend spokes
- Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload
- CNC machined, anodized and assembled entirely in Asheville, NC
- Unified service parts across the range
- Service-friendly retained pawls actuated by durable leaf-springs
$320.00
Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 points with 4° engagement, by way of a six pawl driver and 45 tooth drivering.
- High-load sealed cartridge bearings
- Classic j-bend spokes
- Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload
- CNC machined, anodized and assembled entirely in Asheville, NC
- Service-friendly retained pawls actuated by durable leaf-springs
- Unified service parts across the range
$305.00 - $320.00
- Confident and capable of cleaning the A-line, but budget friendly
- Dual phased 90 POE hubs with fast 4 degree engagement
$470.00
Completely re-engineered using insights gleaned from more than 100,000 original Hydra hubs in the field, Hydra 2 features a newly designed 65% thicker axle, larger 6903 bearings with new labyrinth seals, and enlarged pawl pockets that ensure bombproof durability under the most demanding conditions.
- 6 Pawl Hydra 2 Freehub Body provides a groundbreaking 870 P.O.E. Hydra 2 Freehub body engages every .41 degrees yielding telepathic control
- Refined drive ring and increased tooth counts on each pawl provide increased relability and engagement with less drag
- Designed specifically for trail, enduro, and downhill riders with the strength to handle full-power ebikes
- Scalloped flanges on Hydra2 j-bend hubs increase overall strength, and remove excess material for a lighter, stronger hubshell
- Revised axle design is 65% thicker with an improved stress washer design
- Larger, 5.5mm pawl pockets that evenly distribute force 26% better, preventing deformation of the pockets over years of use
- Full-contact radial lip seals paired with proximity dust shields keep grit and grime out, and lubrication in
- Durable 6903 bearings are used throughout for smooth, long-lasting performance
$470.00 - $510.00
Completely re-engineered using insights gleaned from more than 100,000 original Hydra hubs in the field, Hydra 2 features a newly designed 65% thicker axle, larger 6903 bearings with new labyrinth seals, and enlarged pawl pockets that ensure bombproof durability under the most demanding conditions.
- 6 Pawl Hydra 2 Freehub Body provides a groundbreaking 870 P.O.E. Hydra 2 Freehub body engages every .41 degrees yielding telepathic control
- Refined drive ring and increased tooth counts on each pawl provide increased relability and engagement with less drag
- Designed specifically for trail, enduro, and downhill riders with the strength to handle full-power ebikes
- Scalloped flanges on Hydra2 j-bend hubs increase overall strength, and remove excess material for a lighter, stronger hubshell
- Revised axle design is 65% thicker with an improved stress washer design
- Larger, 5.5mm pawl pockets that evenly distribute force 26% better, preventing deformation of the pockets over years of use
- Full-contact radial lip seals paired with proximity dust shields keep grit and grime out, and lubrication in
- Durable 6903 bearings are used throughout for smooth, long-lasting performance
$230.00 - $240.00
Completely re-engineered using insights gleaned from more than 100,000 original Hydra hubs in the field, Hydra2 features a newly designed 65% thicker axle, larger 6903 bearings with new labyrinth seals that ensure bombproof durability under the most demanding conditions.
- Designed specifically for trail, enduro, and downhill riders with the strength to handle full-power ebikes
- Scalloped flanges on Hydra2 j-bend hubs increase overall strength, and remove excess material for a lighter, stronger hubshell
- Revised axle design is 65% thicker with an improved stress washer design
- Full-contact radial lip seals paired with proximity dust shields keep grit and grime out, and lubrication in
- Durable 6903 bearings are used throughout for smooth, long-lasting performance
$510.00
Completely re-engineered using insights gleaned from more than 100,000 original Hydra hubs in the field, Hydra 2 features a newly designed 65% thicker axle, larger 6903 bearings with new labyrinth seals, and enlarged pawl pockets that ensure bombproof durability under the most demanding conditions.
- 6 Pawl Hydra 2 Freehub Body provides a groundbreaking 870 P.O.E. Hydra 2 Freehub body engages every .41 degrees yielding telepathic control
- Refined drive ring and increased tooth counts on each pawl provide increased relability and engagement with less drag
- Designed specifically for trail, enduro, and downhill riders with the strength to handle full-power ebikes
- Scalloped flanges on Hydra2 j-bend hubs increase overall strength, and remove excess material for a lighter, stronger hubshell
- Revised axle design is 65% thicker with an improved stress washer design
- Larger, 5.5mm pawl pockets that evenly distribute force 26% better, preventing deformation of the pockets over years of use
- Full-contact radial lip seals paired with proximity dust shields keep grit and grime out, and lubrication in
- Durable 6903 bearings are used throughout for smooth, long-lasting performance
$230.00
- Optimized for j-bend spokes
- Scalloped flange design distributes stress more effectively than a simple round shape more effectively
- Optimized flange width for enhanced bracing angles
$470.00
- Optimized for j-bend spokes
- Scalloped flange design distributes stress more effectively than a simple round shape more effectively
- Optimized flange width for enhanced bracing angles
$470.00
- Optimized for j-bend spokes
- Scalloped flange design distributes stress more effectively than a simple round shape more effectively
- Optimized flange width for enhanced bracing angles
$230.00
From its scalloped spoke flange to its new seal design, the Solix Classic front hub represents the pinnacle of performance and longevity. Verses Torch front hubs, Solix employs matched bearing specs with up to 41% higher load capacity to evenly distribute loads, and an updated bearing preload method to ensure smooth performance and long service life. The combination of an endcap debris shield and our new full-contact lip seals provide exceptional bearing protection in even the worst conditions.
- Unique scalloped design of the hub flanges more effectively distributes stress than a simple round shape, improving strength while reducing weight
- Hub flange locations are perfectly placed to offer the best balance of bracing angle and spoke tension, ensuring a solid foundation for any custom wheel build
$470.00 - $475.00
At the heart of the Solix rear hub is a continuously-phased five-pawl freehub seamlessly integrating with a 121 tooth drive ring - offering 605 points of contact translating to an ultra-fine .59° engagement. Crafted from A2 tool steel using precision wire EDM, the pawls and drive rings are engineered for maximum durability. To bring resistance and freewheeling noise to a minimum, we’ve reduced the driving diameter, pawl rotation, and pawl spring pressure, and changed the FH seal layout.
- Matched hubshell bearing specs to evenly distribute loads, an updated bearing preload method to optimize performance and longevity, and freehub bearings with up to 233% higher capacity vs Torch
- The combination of endcap debris shields and new full-contact lip seals provide exceptional bearing protection in even the worst conditions
- Unique scalloped design of the hub flanges effectively distributes stress - improving strength while reducing weight
$470.00
At the heart of the Solix rear hub is a continuously-phased five-pawl freehub seamlessly integrating with a 121 tooth drive ring - offering 605 points of contact translating to an ultra-fine .59° engagement. Crafted from A2 tool steel using precision wire EDM, the pawls and drive rings are engineered for maximum durability. To bring resistance and freewheeling noise to a minimum, we’ve reduced the driving diameter, pawl rotation, and pawl spring pressure, and changed the FH seal layout.
- Matched hubshell bearing specs to evenly distribute loads, an updated bearing preload method to optimize performance and longevity, and freehub bearings with up to 233% higher capacity vs Torch
- The combination of endcap debris shields and new full-contact lip seals provide exceptional bearing protection in even the worst conditions
- Unique scalloped design of the hub flanges effectively distributes stress - improving strength while reducing weight
$32.49
- CORTEX EVO FC cone set
- non driver side cone and driver side cone (incl. Washer)
- non driver side cone and driver side cone (incl. Washer)
$23.49
- 14 mm thru-axle (TA) system for next-level strength and stiffness
- No more bent axle/bolts or fork dropouts!
- 14 mm thru-axle allows for x2 modern plastic pegs and includes washers for adjustment
- Hub uses x2 OVERSIZE rear hub bearings for increased smoothness and durability
- Super strong, grind friendly hub
- Narrow flange for better spoke clearance when grinding
- Includes x2 nylon/fiberglass hub guards
- PLEASE NOTE – only compatible with 14 mm forks(check the Storm TA Fork)
- 382 g (13.5 oz) – hub w/ thru-axle
- No more bent axle/bolts or fork dropouts!
- 14 mm thru-axle allows for x2 modern plastic pegs and includes washers for adjustment
- Hub uses x2 OVERSIZE rear hub bearings for increased smoothness and durability
- Super strong, grind friendly hub
- Narrow flange for better spoke clearance when grinding
- Includes x2 nylon/fiberglass hub guards
- PLEASE NOTE – only compatible with 14 mm forks(check the Storm TA Fork)
- 382 g (13.5 oz) – hub w/ thru-axle
$209.99
- ISO x6 bolt disc brake mount
- Lightweight, high-performance trail/transition hub
- 120 points of engagement
- 6 pawl multi-tooth 7075-T6 alloy driver
- 3-bearing system driver
- CNC machined knurled flush bolt caps
- 10t driver available separately
- Includes adaptors for 14mm dropouts and extra set of 17mm hex bolts
- Lightweight, high-performance trail/transition hub
- 120 points of engagement
- 6 pawl multi-tooth 7075-T6 alloy driver
- 3-bearing system driver
- CNC machined knurled flush bolt caps
- 10t driver available separately
- Includes adaptors for 14mm dropouts and extra set of 17mm hex bolts
$12.99
- Nylon/fibergalss construction
- Threadless, slides smoothly onto existing cone/ low-friction nylon material
- Weight: 39g (1.4oz/ 0.08lb)
- Fits on Eclat Shift, Seismic, Cortex EVO freecoaster and Cortex EVO cassette hubs
- Threadless, slides smoothly onto existing cone/ low-friction nylon material
- Weight: 39g (1.4oz/ 0.08lb)
- Fits on Eclat Shift, Seismic, Cortex EVO freecoaster and Cortex EVO cassette hubs
Page 1 of 1